- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
Nom de l'information: | Yulin un coulis secondaire Les magasins d'usine de matériel d'injection |
Publié: | 2013-12-05 |
Validité: | 300 |
Caractéristiques: | 50 kg |
Quantité: | 9999.00 |
Description Prix: | |
Description détaillée du produit: | Un siège pate consultatif: 18690497786 abord, le produit utilise des chemins de fer, les routes, les ponts, les tunnels et d'autres projets dans la base de la colonne, pile, groupe de rock, des clips ferroviaires, roulements et autres composants de l'étage et le jointoiement. Deuxièmement, les caractéristiques du produit 1, la résistance initiale de haute résistance: la force d'une journée à 20 MPa à 2, l'état de flux: pour combler toutes les lacunes et répondre aux exigences de scellement secondaire. 3, pas de retrait: pour assurer une intégration étroite entre les dispositifs et les infrastructures. 4, la construction de basse température: -10 ℃ température pour permettre la construction extérieure. 5, la résistance d'isolement: la structure haute densité après cuisson présente de bonnes propriétés d'isolation et d'imperméabilité. 6, durée: Ce produit est un matériaux inorganiques cimentaires, la vie est plus que la durée de vie du béton de fondation. Après un million de fois essai de fatigue, expérience du cycle 50 de gel-dégel aucun changement significatif dans l'intensité. 30 jours immergés dans l'intensité pétrolière s'est considérablement améliorée. Troisièmement, une fois la première étape dans le bloc suspension Construction Description: Le traitement de base et coffrage: 1, burinage surface de fondation en béton ou l'utilisation du renforcement de l'interface J-302, puis le coulage du béton agent de traitement de l'interface à faire. Et le composant (par exemple une plaque d'acier) de pate collés ensemble une fois siège rouille et d'huile et d'autres peau enlevée. 2, bloc suspension avant d'arroser de nouveau 4h, réalisée sur la base de la surface de béton humide, peut ne pas avoir de l'eau lors de l'arrosage. 3, chicanes devraient succursale située étanche pour éviter les fuites de plasma, 901 peut être rapidement à étanchéiser les joints entre le modèle des agents de blocage. Deuxième étape: Remplissage: 1, ajouter de l'eau: Selon un sac de siège de suspension (25 kg) à rapport de 4,0 ~ 4,5 kg d'eau à mélanger avec de l'eau, tels que la construction ne nécessite pas une grande mesure peut être une réduction correspondante de l'écoulement de l'eau. 2, la procédure de mélange: Après une agitation d'une quantité prédéterminée de la cuve d'eau dans l'agitateur, la suspension a été versée dans la partie de cylindre d'un siège agité diluer, puis l'excès de matière dans le temps de mélange doit être contr?lé du début à la fin d'une minutes. 3, des pales d'agitation devrait se déplacer lentement vers le haut et vers le bas le long de la périphérie du cylindre pour rendre le fond du canon et le canon paroi adhérence HGM un siège à la bouillie de mélange des ingrédients secs; lames de mélange ne doit pas être élevé au-dessus du niveau attendu, de sorte que l'air avec revenu. 4, mélangeant une bonne pate de siège arrosage rapide. Lors de l'arrosage, dans la mesure du possible à partir du c?té de l'injection, afin de faciliter l'évacuation de l'air entre le sol et la fondation en béton. Si nécessaire, le bambou et d'autres outils peuvent être utilisés détournement. Après arrosage continu doit commencer sans interruption. La troisième étape: Entretien: 1, de la paille humide ou couverture de tissu a un bon arrosage une fois par siège sur la pate et arrosage entretien, 2-6 fois par jour. 2, la température de cuisson doit être supérieure à 15 ℃, période de 7 jours de durcissement. période de maintenance peut être prolongée si la température est basse endroit. 3, de la construction de l'hiver mesures d'isolation qui doivent être prises. Quatrième étape: Chaimo: Chaimo arrosage devrait être achevé après 24h après décoffrage continué conservation. Quatrièmement, l'emballage, le stockage 1, les spécifications d'emballage: 50 kg ± 0,5 kg / sac. 2, Stockage: Conserver dans un endroit sec, frais, sans l'humidité stockée à la période de stockage est de trois mois. Besoin de revérifier prolongé avant utilisation après le passage. S'il vous pla?t se référer aux instructions pour l'utilisation de ce produit, liées à des questions, s'il vous pla?t consulter votre revendeur local ou notre |
Vous êtes le 10725 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Pékin Swinge spécial Building Materials Technology Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie